TC358762XBG

TC358762XBG

功能：TC358762XBG是一颗将MIPI DSI信号转换成RGB（DPI）/ MCU-I/F(DBI)的芯片，最高分辨率支持到1080P@60Hz

产品特征：

MIPI DSI接口

Dual Data Lane DSI Link with Bi-direction support at Data Lane 0

 Maximum speed at 800 Mbps/lane

 Video input data formats: RGB-565, RGB-666 and RGB-888

 Video input frame rates: Up to 60 fps for WXGA(1366 × 768)

 Support various DSI packet types

 RGB（DPI）接口：

（1）Bus speed up to 75 MHz burst rate with data rate up to 216 Mbytes/s

   （2）Support the following pixel formats:

- RGB666 18 bit per pixel

- RGB666 loosely packed 18 bit per pixel

- RGB565 16 bit per pixel

- RGB565 loosely packed 16 bit per pixel

- RGB888 24 bit per pixel

Ø（3） Support up to frame size 1366 × 768 at 60 fps

MCU-I/F(DBI) 接口：

Read/Write Data/Command from the external DBI slave device

Support DCS commands, which is compliant with  MIPI DBI-B standard

 Support Intel 80xx CPU I/F with either 8-bit or 16-bitcommands

 Programmable Output Data Format and Bus Width

- 8 bit Bus, RGB 565 (2 cycles/pixel)

- 8 bit Bus, RGB 666 (3 cycles/pixel)

- 8 bit Bus, RGB 888 (3 cycles/pixel)

- 9 bit Bus, RGB 666 (2 cycles/pixel)

- 16 bit Bus, RGB 565 (1 cycles/pixel)

- 16 bit Bus, RGB 666 (3 cycles/2 pixel) note1

- 16 bit Bus, RGB 888 (3 cycles/2 pixel) note1

- 18 bit Bus, RGB 666 (1 cycles/pixel)

- 24 bit Bus, RGB 888 (1 cycles/pixel)

 Support up to 864×480 at 60 fps (or 1280×720 at 30 fps)

初始化接口：

● SPI Master

 4-pin SPI master I/F, CSX[1:0], CLK, DI and DO

 Support two SPI slaves

 Data Rate up to 10 Mbps

● I 2 C compliant interface Slave Port

Data Rate up to 400 kHz

External I 2 C master can access TC358762XBG

internal registers via this port

Address auto increment is supported

TC358762XBG Slave Port address is “0001011”

● Support DCS commands

供电：

MIPI D-PHY: 1.2V

 I/O: 1.8V – 3.3V (all IO pins must be same power level)

Core: 1.2V

功耗：

Ø PLLON mode (480×864 @60fps, DSI-CLK: 400MHz, PLLCLK: 50.28MHz, PCLK=PLL/2)

Ø 19 mW

封装：² BGA 64 pins

 5.0mm × 5.0mm × 1mm

 0.5mm ball pitch